TAPE MEASURE 21 TO 30 FEET

High-grade steel for long-term durability; Polished and lacquered to resist rust; Permanently impressed graduations; Face graduations in Eighths and twelfths, back graduations in Eighths and sixteenths; Body measures 12 in. X 1-1/2 in. ; tongue is 8 in. X 1 in.; Hang hole for easy storage; Made in the USA; High grade steel; Face graduated in 8ths and 12ths; Back graduated in 8ths and 16ths; Body is 12" x 1-1/2"; Tongue is 8" x 1". Mayes 12� steel utility square is compact & accurate. High...

Die cast zinc body, solid brass hardware, blade treated to resist rust, includes scribe and level, virtually unbreakable vial, self locking spring loaded blade to assure accurate settings. Over 10 uses. Featuring an impact-resistant acrylic level vial that takes work site abuse better than other vials. A mainstay in Swanson's tool lineup, this 12" workhorse also acts as a depth gauge, and has 45� and 90� working surfaces.

This is the only composite combination square with a precision etched stainless steel blade AND brass hardware! It also acts as a depth gauge, and has 45� and 90� working surfaces. The impact resistant acrylic level vial outperforms other less durable tube-type vials and the rugged Speedlite construction makes it a durable featherweight!

Die cast metal handle. Solid brass knobs. Vial individually regulated to ensure accuracy. Coated blade resists rust. Inside and outside try square. Unique high visibility black blade with deep etchings filled with yellow paint.

12 inch grooved blade calibrated in 1/8", 1/16", 1/32" graduations. Self aligning draw bolt. Harden scriber and level vial built into handle. Display carded.

High grade steel, permanently impressed gradations in 8ths, 12ths, and 16ths and on the back in 8ths and 16ths. Thermally fused powder paint finish. This compact 8"x12" Steel Carpenter Square is formed from high-grade tempered steel to resist impacts, scratches, and stress cracks. The anti-glare matte finish reduces glare from the sun during outdoor use.

High grade aluminum alloy, permanently gradations, reversed reading scale. Thermally fused powder paint finish. High-grade aluminum alloy resists impacts & scratches and doesn't retain heat from the sun. Silver anodizing increases durability, and the 16" by 24" body helps with stud layout. Swanson's 16"x24" Aluminum Carpenter Square is a long-term investment in a lightweight tool

Rafter layout square with adjustable arm. Ideal for marking repetitive cuts. Black body with yellow graduations for maximum readability. Heavy duty aluminum construction. Common/Jack and Hip/Valley scales. Can be used as a saw guide, bevel or protractor.

Speed the job of rafter or angle layout by using the Johnson rafter angle square. Made of die cast aluminum with permanently molded graduations. All three edges are milled and both faces are polished to a satin lustre. Attractive blister carded package includes easy to use and understand instruction manual. Manual describes the layout for the common, hip, valley and jack rafters. Also stair layout and solar support examples.

Compact & Portable folds to only 10-1/4" long, 2-1/4" wide & 1-1/4" deep. Lightweight/durable. The SPEED� Bevel is easy to use. Made from tough, light-weight, high impact ABS composite, the SPEED� Bevel is actually five tools in one a framing/rafter square, a try square, a miter square, an angle finder/protractor and a sliding t-bevel. Easy to use, simply unsnap it and loosen the large thumb screw and you have a fully functional sliding T-bevel. Folds to just over one inch high and 2 inches...

Frames entire roof using One Number. Ideal for trim cabinets, and all woodwork. Full 0 deg. to 90 deg. scale for measuring angles, and full rafter scales. Use as a handy saw guide for cutting angles with electric or hand saws. Has features of framing, miter and protractor squares. The 8" Speedlite Square is formed from lightweight, high-impact structural composite, and is available in matte gray, high-visibility yellow and high-visibility orange. It's basically the same as the one and only...

Adjust-A-square. 1/4" blade and head thickness. Screened, thermal bonded graduations in 1/8" and 1/16". Head adjusts to any angle and folds flat for easy transportation.

Extra thick aircraft grade aluminum for durability. Individually inspected for accuracy. Deep graduations are filled with yellow paint for superior readability. Surface protected to resist corrosion. Tell-sell sleeve. 24" x 2" . Tongue 16" x 1 -1/2"

8" Pro Carbonized Bamboo try Square. Heavy duty stainless steel blade. Graduations are etched in 1/8" and 1/16" increments. Carbonized bamboo handle routed grip.

The complete framing square that fits in your tool box. Makes those home repairs and hobby projects easier. For roof framing only one number is used for all rafter cuts. Package includes instruction booklet. It measures a full 12" x 12" and 17" across the diagonal, which is marked off in degrees from 0 to 90. Square also has a scribe bar notched every 1/4" for pencil to lay out parallel lines. This Square is seven in one: a framing square, try square, miter square, protractor, saw guide, star...

New Diamond TM feature simplifies rafter seats cuts. Lightweight, high-impact material. Easily fits in a 9" high toolbox. Easy to read with bright safety orange color. Both sides marked exactly the same. Centerline guide for locating center of round stock. Won't mar siding finish. Notches for ease in scribing lines.

One level glass; scratch awl in cast iron handle. Reversible ground blade of bright steel in oiled finish. Marked in 1/32, 1/16 and 1/8 inch. Blue enameled handle.

Silver anodized finish with black epoxy paint numerals for long wear and legibility. Notched head, reverse rulings, and stud markings allow for quick accurate cuts. Aircraft-style rivets secure blades for long term accuracy. Has one arm which measures 16" long for use in finding studs. Head is notched which enables cutting a 48" board in one pass while the board is standing on the floor. Made in USA

Lifetime guarantee. Convenient square with accurate graduated 12" x 1" steel blade. Blade is grooved so handle may be moved & locked by adjusting screw. Other features include metal scribe, depth gauge, & an acrylic vial for leveling work. Square can be used as a try & miter square.

Use as a protractor, try miter or framing square. Includes instruction booklet for rafter length and roof construction. Measures 7 1/4" x 7 1/4" and 10 1/2" across the diagonal. Injection molded plastic construction.